Yamaha to Likely Build the Motiv, Based on Gordon Murray’s City Car, Using Murray’s iStream Assembly Process

gordonmurrayyamaha

With most of the new cars and concepts leaked weeks ago there hasn’t been much real breaking news from the Tokyo Motor Show, so it was a bit of a surprise that Yamaha announced that it will be the first automotive manufacturer to embrace master automotive designer Gordon Murray’s revolutionary iStream assembly process and that it will use the iStream process to build a lightweight two-seat city car called the Yamaha Motiv. The Motiv, based on Murray’s T25 and T27 concepts, will be available in both gasoline and electric versions and targeted at the European market.
The project still needs to be approved for production by the Yamaha conglomerate’s main board of directors, but it has been fully engineered for mass assembly. Gordon Murray Design and Yamaha first began discussing a possible project five years ago but the worldwide recession put it on the shelf until 2011, when they started to jointly develop the Motiv


       gordonmurrayyamaha1



“Forming a partnership with Yamaha is a dream for us,” said Gordon Murray, who started developing the iStream concept of building cars more than a decade ago. “Yamaha has completely embraced the principles of iStream, and could not be a more ideal partner. They have huge technical resources, but their team on this project has been tightly-knit, very skilled and very quick-acting.





gordonmurrayyamaha2





The main concept of iStream is to abandon the traditional stamped metal, spot welded construction, used almost universally by the auto industry for more than 60 years, and replace it with one based on relatively simple tubular steel frames reinforced with sheets of composites that make up the floor, firewall, bulkheads and roof structure. The outer skin is made from non load bearing impact resistant plastic.  Murray claims class-leading stiffness and crashworthiness.
The Motiv is about the same size as one of Daimler’s Smart cars, about two inches narrower and lower, with the same 2,690 mm length, but it’s about 100 kg (220 lb) lighter.
gordonmurrayyamaha5
Unlike the three seat layout with a central driving position similar to Murray’s superlative McLaren F1, Yamaha decided to make the Motiv a two seater, using Murray patented thin shell composite  seats. The instrument panel and controls are said to reflect Yamaha’s musical instrument and audio equipment heritage.
The Motiv is a midengine design with the compact powertrain mounted low in the car, in front of the rear axle. Another GMD concept, iLink, a simple strut-type independent rear suspension system, is used, an improvement over the beam axles typically found in city cars. The EV version, labled the Motiv-e, uses drivetrain components by Zytec including a 33 hp electric motor, while the gasoline version will use a 1 liter three cylinder engine, purpose designed for the Motiv by Yamaha, driving the rear wheels through a 6 speed DCT.
gordonmurrayyamaha3
The Motiv-e will have a top speed of 65 mph and a 0-60 mph time of 15 seconds, intended to be exclusively used in the city. With 70 to 80 hp on tap, the combustion powered Motiv will be a bit quicker. With a power to weight ratio of about 100 horsepower per ton, 0-60 times should be under 10 seconds with a highway capable top speed of 100 mph. No estimated mileage or range figures have been released.
It’s possible that enthusiasts may embrace the Motiv. Low weight, midengine layout, a stiff chassis, a low center of gravity and all four wheels independently suspended, not to mention Murray’s reputation as one of the premier sports car designers of all time, means that the the gasoline Motiv may have more than just pretensions when it comes to sporty driving.
While officially it’s just a concept to test public reaction, Autocar reports that if the Motiv is greenlighted by the Yamaha board, a new factory for using the iStream process could be built and the car could be ready for sale by 2016. No prices have been quoted but Yamaha and GMD say that the Motiv has been designed as a “semi-premium” product so it will likely be priced similarly to the Smart, about £8000-£12,000 (~$12,900-$19,350). Murray says that the iSTreem process can support an annual output of up to 200,000 cars.
Nothing is guaranteed, but Murray is optimistic that the Motiv will see production. “This is Yamaha’s car, not ours,” he says, “and it is up to them to decide whether it goes into production. But they’re fabulous partners, and we are very optimistic for the car’s prospects.”
Ronnie Schreiber edits Cars In Depth, a realistic perspective on cars & car culture and the original 3D car site. If you found this post worthwhile, you can get a parallax view at Cars In Depth. If the 3D thing freaks you out, don’t worry, all the photo and video players in use at the site have mono options. Thanks for reading – RJS